Your battery can't do self-consumption and EV charging well at once
I got a message a few weeks back from a reader in Ballarat who'd just had a Powerwall 3 installed alongside her existing 6.6kW solar array, and she wanted to know why her battery kept draining every afternoon even though she was "obviously" generating more than enough for the house and the car. The answer is that she wasn't wrong about the generation. She was wrong about the plumbing. Her system was making a decision every single day about which load got the sun first, and nobody had told her what that decision was, let alone let her choose it herself.
This is the conversation nobody has before the system goes in. Everyone talks about battery sizing, everyone talks about charger amperage, but almost nobody sits a homeowner down and says: on a day when your solar can either fill the battery or charge the car, but not comfortably both, what happens? Because something has to give, and if you haven't told the system what you want, the system will decide for you, and it usually decides in a way you won't love.
Why solar self-consumption and EV charging are actually rivals
A typical 6.6kW to 10kW residential array on a clear day might produce somewhere in the range of 25 to 45kWh, depending on season and location. A home battery like the Powerwall 3 or the BYD Battery-Box Premium HVS wants a solid chunk of that, usually 10 to 15kW of charging capacity, to fill from empty by early afternoon. An EV on a 32A or 40A home charger, meanwhile, can happily absorb 7 to 11kW for four or five hours straight if you let it.
Add those up and you've got two large, hungry loads both wanting the same few hours of northern-facing roof output, plus whatever the house itself is drawing for the fridge, hot water and everything else. On a lot of days there simply isn't enough solar to do all three properly. Something is going to import from the grid, or something is going to charge slower than you'd like, or the battery finishes the day half full when you wanted it topped up for the evening peak.
I've been running an EV off my own rooftop for a bit over four years now, and I'll be honest, I got this wrong for the first eighteen months. I had the car set to charge whenever it was plugged in, and my battery set to charge whenever there was excess solar, and the two systems fought each other silently every single day. The battery would grab the first few kW of morning sun, the car would grab the rest, and by 2pm on a mild autumn day I'd have a battery sitting at 60% and a grid import line item I couldn't explain until I actually sat down and logged what was happening hour by hour.
The three jobs a home energy system is actually doing
It helps to separate out what the battery is actually for, because the answer changes what you should prioritise. If the battery's main job is backup power for outages, then filling it first, every day, before anything else touches the solar, is the right call. A half-charged battery at 6pm because the car ate the excess is not "backup" in any meaningful sense. Our piece on sizing battery capacity for self-consumption vs backup covers this distinction in more depth, and it's worth reading before you touch your charge settings, because the sizing and the scheduling decisions are downstream of the same question.
If the battery's main job is shifting your own solar into the evening peak so you're not paying peak import rates for dinner and TV time, that's a self-consumption job, and it competes directly with EV charging for the same window of sun. If the battery's job is genuinely both, which is common and reasonable, you need to decide the split explicitly rather than let the inverter's default logic pick for you. Most hybrid inverters, including something like the Fronius Symo GEN24 Plus or the generic 8kW-class hybrid inverter range, ship with a default priority order out of the box, and it is almost always battery-first, then house load, then export, with the EV charger treated as just another household circuit rather than a managed load. That's fine if you've got a dumb charger. It's a waste if you've paid for a smart one.
Setting an explicit priority order
The fix, in most cases, is not a bigger battery or a bigger array. It's telling your system, in order, what matters most on a given day. I'd argue most installers under-explain this at handover, partly because it genuinely depends on the household and partly because it's easier to hand over a system on default settings and move on to the next job.
A reasonable order for a household that drives to work most days and wants backup resilience looks like this: battery to a minimum reserve first (say 20 to 30%, enough to ride out an evening outage), then EV charging up to whatever daily kilometre requirement you actually have, then remaining battery charge, then export. A household that rarely drives during the week but wants maximum bill reduction might flip that, filling the battery fully before the car gets a look in, and using off-peak overnight rates or weekend solar surplus for EV charging instead.
The practical tool here is usually a smart charger with solar-aware or excess-only charging modes, something like the Zaptec Go or the Tesla Wall Connector Gen 3, both of which can throttle current up and down in near real time based on what's actually left over after the house and battery have taken their share. Set correctly, the charger effectively becomes the last in line, sipping whatever's spare rather than grabbing a fixed amount regardless of conditions. This is a genuinely different behaviour to a basic charger running on a timer, which has no idea what your battery or house load is doing at all.
Where charge and discharge windows come in
None of this works well if your battery's own charge and discharge windows are set generically. We've written previously about how to set your battery's charge and discharge windows properly, and the short version that matters here is: a battery that's still trying to top itself up at 3pm because its window is set too wide will keep out-competing the car for the tail end of the solar day, even if you've told the charger to run in excess-only mode. Tightening the battery's charge window to the hours when solar is genuinely strong, say 9am to 2pm depending on season and array orientation, frees up the shoulder hours for EV charging without the two systems constantly renegotiating.
On the discharge side, if your battery is set to discharge into the house through the afternoon before the car's even plugged in, you can end up in the odd situation where the battery empties itself during the day, then has nothing left for the evening peak, while the car sat idle in the driveway the whole time soaking up nothing because it wasn't due to charge until you got home at 6pm. Aligning EV charging to the middle of the day, even if that means charging at work or shifting your at-home charging schedule earlier, solves a lot of this friction without touching hardware at all.
What actually changes month to month
The uncomfortable truth is that the right priority order shifts with the seasons, and I don't think enough advice acknowledges this. In summer, with long days and strong solar, most Australian and southern-US households can genuinely run battery-first and EV-second and still get a reasonably full charge into the car most days, because there's simply more sun to go around. In winter, with shorter days and weaker output, especially split-orientation roofs which we've covered separately in the piece on east/west solar, you may need to accept that full self-consumption on both fronts isn't realistic on a cloudy July day, and either top up the car from off-peak grid power overnight or accept a partial battery charge on car-charging days.
This is where a genuinely useful energy monitoring app earns its keep, something that shows you generation, battery state, EV charge rate and grid import on one screen, rather than three separate apps that don't talk to each other. If your installer didn't set this up at handover, it's worth asking for, because eyeballing four separate dashboards to work out why you imported power on a sunny day gets old fast.
A note on VPPs and export tariffs
If you're enrolled in a virtual power plant arrangement, like the NSW VPP Incentive, there's a fourth competitor in the mix: your retailer wanting to discharge your battery into the grid during a peak event, sometimes at exactly the moment you'd rather be charging the car. Most VPP agreements let you set a reserve the battery won't go below, and it's worth setting that reserve with EV charging in mind, not just outage backup, particularly if you charge overnight and don't want the battery drained by a 6pm VPP event before your own load kicks in.
Export tariffs matter here too. If your feed-in rate is genuinely low, and in a lot of Australian markets it now is, there's a reasonable argument for prioritising EV charging over export even ahead of some battery charging, since a kWh that charges your car directly offsets fuel you'd otherwise buy, while a kWh exported at a few cents does very little for you at all. This is a case-by-case calculation rather than a blanket rule, but it's one most default inverter settings don't account for at all.
Getting the settings right at handover, not six months later
If you're getting a battery and charger installed together, or adding one to the other, the conversation to have with your installer isn't just "will this work" but "in what order will this prioritise on a normal day, and can I change that seasonally." A properly licensed installer, the kind covered in our piece on vetting a solar battery electrician versus an accredited installer, should be able to walk you through the actual priority logic on your specific inverter and charger combination, not just wave at a generic app screenshot. Ask them to set it up for your actual daily pattern, not the demo defaults, and ask what changes if that pattern shifts, like a new work-from-home day or a second EV in the household. The Clean Energy Council's guidance on accredited installers is a reasonable starting point if you want to check credentials before you sign anything, and the US Department of Energy's Office of Energy Efficiency and Renewable Energy publishes similarly useful background on managed EV charging for anyone reading from that side of the Pacific.
Reckon most households don't need a bigger battery or a faster charger. They need someone to actually ask them what a normal Tuesday looks like, and set the system up for that Tuesday instead of a demo day in a showroom.
— Declan Osei, Battery & EV Charging Writer
Common questions
- Should I charge my EV or my battery first on solar?
- It depends on the battery's job. If it's for outage backup, prioritise the battery to a minimum reserve first. If you're mainly chasing bill savings and don't need full backup, a mid-day EV charge often delivers more value per kWh than a fully charged battery sitting there overnight.
- Can I set different priorities for summer and winter?
- Yes, and you generally should. Most hybrid inverters and smart chargers let you adjust charge windows and priority order seasonally. A wider self-consumption window in summer and a tighter, EV-focused window in winter is a common, sensible split.
- Will a smart EV charger automatically avoid draining my battery?
- Only if it's set to an excess-only or solar-aware mode and your battery's charge window is configured correctly alongside it. On default settings, most chargers just draw a fixed current regardless of what the battery or house is doing.
- Does a VPP program affect EV charging plans?
- It can. Some VPP arrangements discharge your battery during grid peak events, which can leave less reserve for evening EV charging. Setting a battery reserve that accounts for your charging routine, not just outage backup, avoids this conflict.
Declan writes about home batteries, EV chargers and the emerging vehicle-to-grid category, drawing on his own multi-year EV ownership.
EV owner since 2019; home-charging enthusiast.
More from Declan Osei
- Why your solar panels and battery compete for the same sunny hoursYour panels, battery and household loads all want the same midday window. Here's why that overlap quietly shrinks the self-consumption gains you were promised.
- Your inverter's "smart mode" quietly decides self-consumption or backupMost hybrid inverters default to a mode that favours either self-consumption or backup reserve, not both. Here's how to check which one you're actually running.
- Your battery's charge algorithm isn't optimised for your actual tariffMost home batteries ship with a generic self-consumption mode that ignores your real tariff shape. Here's how to check yours and fix it.
- Sizing your home battery around C-rate, not just kWhBattery quotes sell you on kWh, but C-rate decides what your battery can actually deliver when you need it most. Here's why that number matters.
- Reserve settings vs backup sizing: why your battery doesn't do bothA battery set for maximum daily self-consumption often fails you in an outage. Here's why reserve settings and backup sizing pull in opposite directions.
- Why your battery's fire rating isn't the same as its install ratingA battery's cell safety rating and its approved installation location are two separate things. Here's why that gap trips up more installs than it should.