How many quotes you actually need before signing a solar contract

By Sam Whitfield · September 30, 2026 · 9 min read
Solar panels installed on a home roof
Photo by Vivint Solar on Unsplash

I used to sit at kitchen tables running the numbers for homeowners who'd already had "a couple of quotes" and just wanted me to confirm they'd picked the right one. Half the time they hadn't. Not because the other installer was dodgy, but because two quotes for a system this size and this permanent almost never give you enough spread to see what's actually normal versus what's a red flag. The number I settled on after six years of installing, and now a few more years of writing about it, is three to four. Not two, not six.

That's the practical answer to a question I get asked constantly: how many solar quotes should I actually collect before I sign anything? The honest version is a bit longer than a number, though, because the point of multiple quotes isn't really price shopping. It's pattern recognition. You're trying to figure out what the market thinks your roof needs, and any single quote, even from a great installer, is one data point wearing a business's margin and sales targets.

Why two quotes tells you almost nothing

Two quotes gives you a comparison, not a pattern. If installer A recommends a 6.6kW system with a name-brand panel and installer B recommends 9.9kW with a budget panel, you've got two answers and no way to tell which one is closer to correct for your house. You need a third and ideally fourth quote to see whether A or B is the outlier.

I watched this exact scenario play out with a client on a street near Chapel Street in a middle-ring Melbourne suburb a few years back. Two quotes, wildly different system sizes, and the couple was ready to just split the difference and pick whichever salesperson they liked more. We got a third quote, and it landed almost exactly between the two on sizing but used a completely different inverter topology. That third data point was what let them ask the right follow-up questions instead of guessing.

The other reason two isn't enough: install quality and paperwork discipline vary enormously between outfits chasing the same job, and you can't see quality from a PDF. You need enough quotes in front of you to start noticing who explains their reasoning and who's just filling in a template.

Why six or more is wasted effort

On the other end, I've seen homeowners collect six, seven, even eight quotes trying to find some mythical perfect answer. Beyond four, you stop learning anything new and start just adding admin. Every installer needs a roof inspection or at minimum a satellite-imagery consult, a call back, and a follow-up conversation. Multiply that by seven and you've turned a two-week decision into a two-month one, during which panel and inverter pricing may have shifted anyway, and you're fielding calls from four salespeople who all now have your number.

There's also a diminishing-returns problem with your own judgement. After the fourth quote, most people I've spoken with can't remember which installer said what. The comparison spreadsheet gets messier, not clearer. Three to four well-chosen installers, ideally a mix of a local independent, a mid-size regional player, and one of the bigger national brands, gives you enough spread without drowning you in detail.

What to hold constant across quotes

The number of quotes matters less than whether you're asking each installer to quote the same job. If one quote is for a 6.6kW system with a basic string inverter and another is for 9.9kW with microinverters, you're not comparing installers, you're comparing entirely different systems, and the price difference tells you nothing.

Before you request quotes, decide roughly what you're trying to size for. Are you sizing for current daytime usage, or leaving headroom for a future EV or battery? That's a real decision with tradeoffs, and I'd point you to our piece on system sizing for a future EV or battery before you even start calling installers, because it changes what number you ask each of them to quote against.

Once you've got a rough sizing target, ask every installer to quote against it, then let them push back if your number's wrong. A good installer will tell you your 5kW ceiling assumption is conservative given your roof space, or that 10kW is oversized for your usage. That pushback is actually useful information. An installer who just quotes whatever number you gave them without comment is less useful to you, not more.

The line items that actually separate quotes

Headline price and system size are the easy comparisons. The parts that actually differentiate installers are buried further down the quote, and this is where I'd spend the bulk of your comparison time.

Check the inverter architecture first. A string inverter, microinverters, and power optimisers solve different problems and cost different amounts, and the choice should map to your roof's shading and orientation, not just to what the installer has in stock. We've covered the actual tradeoffs in string inverters vs microinverters vs power optimisers, and if your roof has any partial shade from trees or a neighbouring structure, that decision matters more than the panel brand.

Next, look at the DC/AC ratio they've specced, meaning how much panel capacity sits behind the inverter's rated output. A ratio that's too aggressive clips your peak generation on sunny days; too conservative and you've paid for panel capacity the inverter can never use. It's a detail installers gloss over constantly, and it's worth understanding before you sign, which is why we wrote a full explainer on DC/AC ratio and inverter clipping.

Then there's warranty structure, and this is genuinely where quotes diverge the most. Panel product warranties, panel performance warranties, and inverter warranties are three separate things that rarely run the same length, and a shorter inverter warranty on an otherwise cheaper quote can flip the long-run economics entirely. Our piece on inverter warranty length versus panel warranty walks through why they mismatch, and solar warranty terms that actually matter is worth reading before you compare the fine print line by line.

Orientation, roof condition, and the assumptions hiding in each quote

Here's an assumption worth checking on every single quote: has the installer actually verified your roof's true orientation, or pulled it off a compass app that's reading magnetic north instead of true north? That few-degree error compounds across a full system's output projection and it's more common in quotes than people expect. We've written specifically about this in azimuth vs magnetic north, and it's a fair question to ask an installer directly during the site visit: "did you correct for magnetic declination on this roof plan?" A good installer answers immediately. One who looks blank is a mark against them.

Roof condition is the other assumption nobody states outright. Every quote assumes your roof can take twenty-plus years of panel mounts without needing to come off again, and that's not always true, particularly on older tile or ageing metal roofing. If you haven't already worked through whether your roof needs attention first, our guide on whether your roof needs replacing before solar is worth reading before quotes even land, because a roof that needs work changes the economics of every single quote you receive.

If your roof has genuinely split orientation, east and west rather than a clean north-facing run, ask each installer how they're handling it. Some will oversize slightly to compensate for the flatter production curve; some won't adjust at all. Our piece on split-orientation roofs covers whether that's actually the problem people assume it is.

Reading the payback numbers with a healthy dose of scepticism

Almost every quote will include a payback estimate, and almost every one of them is quietly optimistic, usually because it's modelled on clear-sky generation assumptions that don't account for your actual local weather patterns, shading, or degradation over the system's life. I'd treat the payback year on any single quote as a marketing number first and an engineering estimate second. We've picked apart exactly what these figures hide in what clear-sky payback years actually hide, and it's worth reading with whichever quote currently looks most attractive sitting in front of you, because that's the one you're most tempted to stop scrutinising.

Panel degradation is baked into (or quietly left out of) these projections too. A panel rated at a slightly lower efficiency but a flatter degradation curve can out-produce a flashier spec sheet over twenty years, which is a detail almost no sales conversation raises unprompted. Our explainer on panel degradation rates and payback math is the one I send people to most often after they've already signed something and started second-guessing it.

How I'd actually run the process

Get three to four quotes, all scoped against the same rough system size and same roof reality. Push each installer on the details above rather than just the bottom line, and don't be shy about asking one installer to explain why their number differs from another's, without naming who gave the other quote. A confident, specific answer is a good sign. A vague one, or a quote that never mentions your specific roof by name, is worth walking away from.

If you're still narrowing down which installer to trust with the actual job, not just the numbers, our guide on how to choose a solar installer without getting burned covers the licensing and accreditation side, which matters just as much as the spec sheet. The Clean Energy Council's approved retailer and installer list is a genuinely useful cross-check against any quote you're seriously considering, and in the US the equivalent starting point is checking an installer's NABCEP certification before you sign anything.

I'll admit my number, three to four, isn't gospel. Some readers with unusually complex roofs might get real value from a fifth quote. But if you're at six and still not comfortable, the problem probably isn't a missing quote. It's that you haven't decided what you're actually optimising for yet, whether that's lowest lifetime cost, shortest payback, or maximum resilience with a future battery in mind. Sort that out first, and three good quotes will tell you everything four mediocre ones can't.

— Sam Whitfield, Solar & Batteries, IceWarm

Tagged

Common questions

Is it rude to tell an installer you're getting other quotes?
No, and any installer who reacts badly to that is telling you something useful. Reputable installers quote competitively all the time and expect it, especially for a purchase this size.
Should all my quotes be for the exact same system size?
Not necessarily identical, but close enough that you're comparing similar jobs. Give each installer the same rough sizing target and usage information so their recommendations are responding to the same brief, then let differences in their proposed size become part of what you're evaluating.
Do quotes expire, and does that affect how many I should collect?
Most solar quotes are valid for 30 to 90 days because panel and inverter pricing shifts. That's part of why collecting more than four tends to backfire: by the time you've gathered the sixth, the first one or two may need re-quoting anyway.
Should I get a quote from a big national installer and a small local one?
I'd generally include at least one of each. National installers often have tighter supply chain pricing and standardised processes; local independents sometimes offer more flexibility on design and are easier to reach years later for warranty service. Comparing both types is part of what makes three to four quotes more useful than two similar ones.
About the author
SW
Sam Whitfield
Solar & batteries · California, US

Sam spent six years installing residential solar before moving to writing full-time, and covers panels, inverters and home batteries.

Former licensed solar installer (C-46, California).

More from Sam Whitfield