Vetting a ducted heat pump installer: the warranty registration trap

By Priya Nathan · October 28, 2026 · 7 min read
Attic space with insulation and skylights
Photo by Brett Jordan on Unsplash

Three months ago I took a call from a reader in Ballarat whose Daikin ducted system had a failed board at the fourteen-month mark. The repair quote was north of $1,400. The manufacturer wouldn't touch it under warranty, not because the part had failed outside the cover window, but because nobody had ever registered the installation. The installer had vanished off ABN lookup six months after doing the job. The homeowner had a compliance certificate, a receipt, and nothing else. That's the gap I want to walk through today, because it's one of the most common ways a heat pump owner gets burned and almost nobody checks for it before signing.

This isn't about whether your installer holds a valid refrigerant handling licence or an electrical ticket — I've covered that licence check elsewhere and it's still worth doing first. This is the step that comes after the install is finished and the installer has already been paid: the paperwork that actually activates the manufacturer's warranty, as opposed to the paperwork that just proves the job happened.

Compliance certificate versus warranty registration — they're not the same document

Every state and territory in Australia requires an electrical compliance certificate (sometimes called a Certificate of Compliance for Electrical Work, or COES depending on jurisdiction) for any fixed electrical connection, and most require a separate record for refrigerant handling under the relevant ARC licensing framework. These documents prove the work was done by someone legally entitled to do it. They matter for insurance and for council records.

They do nothing for your manufacturer's warranty. Warranty registration is a separate, voluntary step that the installer — or sometimes you, the homeowner — has to lodge directly with the manufacturer or its local distributor, usually through an online portal, within a defined window after commissioning. Miss it and you typically fall back to a shorter "unregistered" warranty period, which on some brands is as little as twelve months on parts and zero on compressor cover, versus five, seven or ten years when properly registered.

I've seen installers who treat this as an afterthought, something they'll "get to." In my experience, if it's not done on the day of commissioning, it often never happens at all.

What to ask for before you pay the final invoice

Don't wait for the installer to volunteer this. Ask directly, in writing, before the final payment leaves your account:

Ask for the manufacturer's warranty registration confirmation number or screenshot, not just a verbal "yeah we'll sort that." Ask which name and address the unit is registered under — it should be yours, the homeowner, not the installation company's trade account, because if the installer folds the warranty should still sit with the physical address and owner, not a business entity that might not exist in two years. Ask for the serial numbers of both the indoor and outdoor units recorded on the registration, matched against what's actually installed on your wall and roof — mismatched serials are a real and recoverable problem if caught early, and an unfixable one if caught at a claim.

On a project at a place off Ferntree Gully Road a while back, the installer had registered the wrong outdoor unit serial — a transposed digit, nothing malicious — but it meant the manufacturer's system flagged no matching record when the owner tried to lodge a fault claim eighteen months later. Took six weeks of back-and-forth with photos of the data plate to sort out. A five-minute check at handover would have caught it.

The commissioning certificate is where this usually falls over

I've written before about how often commissioning certificates get skipped entirely, and warranty registration is downstream of that same problem. A proper commissioning record should show measured refrigerant charge, superheat and subcooling readings, airflow or static pressure checks on ducted systems, and the final electrical test results. Manufacturers increasingly want this data attached to the warranty registration itself, especially for larger ducted systems like the Daikin Premium Inverter Ducted platform or the Mitsubishi Electric Zuba Central, where the registration portal has fields for commissioning readings, not just a serial number and a date.

If your installer can't produce commissioning readings, that's a reasonable signal the registration itself is also going to be thin or missing. The two problems travel together.

Checking licensing status doesn't stop at the quote stage

Most buyers do a licence check once, at quoting stage, then never think about it again. That's backwards. The licence that matters for a warranty dispute is the one that's current on the date of commissioning, and ideally still current a year or two later when something goes wrong and you need the installer to come back.

In Australia, electrical licences are checked through each state's licensing authority — the Victorian Building Authority, NSW Fair Trading, or the equivalent body, and refrigerant handling is tracked separately through the Australian Refrigeration Council. In the US, HVAC contractor licensing sits at state or sometimes county level, and it's worth checking the specific state licensing board rather than trusting a truck decal or a card shown at the door. None of these registers tell you whether the business will still exist in three years, but they do tell you whether the person standing in your hallway is currently entitled to do the work, which is the baseline you need before any of the warranty conversation matters.

I'd rather see a smaller local outfit that's been trading under the same ABN for eight years than a franchise operation running three-month marketing blitzes through a different shell company each season — and yes, that's a judgement call, not a neutral fact, but I've watched enough warranty disputes go sideways with the second type to stand by it.

What the manufacturer actually needs from you at the one-year mark

Some manufacturers require an annual service record to keep extended warranty cover active, not just the initial registration. This is the part almost nobody reads in the fine print. It's common on heat pump hot water units — both the ProTerra heat pump water heater and the Voltex MAX hybrid heat pump water heater have warranty structures where extended compressor cover depends on a documented annual service, anode or filter check, not just the purchase.

If your installer's warranty registration didn't mention anything about annual service requirements, go back and check the manufacturer's own warranty terms document directly rather than relying on what the salesperson told you. The ENERGY STAR product finder and guidance is a decent starting point for understanding what's typically expected across brands, and it's independent of any one manufacturer's marketing.

Red flags that show up specifically at the registration step

An installer who asks you to sign the final invoice before they've shown you registration confirmation is worth pausing on — reasonable installers do registration same-day, sometimes on-site via a phone app, and happily show you the confirmation screen. An installer who registers the unit under their own trade account rather than your name and address is another flag; it technically completes the step but makes it harder for you to lodge a claim directly if the installer disappears. And an installer who can't tell you which manufacturer portal they use, or who says "the distributor handles that automatically" without being able to show you evidence, is often someone who's never actually done it correctly before.

None of this is paranoia dressed up as advice. The Clean Energy Council's accredited installer guidance in Australia and most manufacturer technical bulletins in the US both treat documented commissioning and registration as standard practice, not an optional extra — it's only treated as optional by installers trying to save twenty minutes on a job.

What I'd actually do differently next time

If I were buying a ducted system again tomorrow, I'd put warranty registration confirmation as a line item in the contract itself, with the final payment tranche explicitly tied to it, the same way payment is often tied to the compliance certificate. It's a small thing to negotiate up front and an enormous thing to chase after the fact. Most installers won't blink at the request; the ones who do blink are telling you something useful before you've paid them a cent.

For the sizing and loadcalc side of the same install — a separate but related place quotes get sloppy — it's worth reading through how load calculations actually get skipped before you even get to the registration conversation, because an undersized or oversized system makes warranty claims more likely in the first place.

The trades hub has the rest of our vetting series if you're checking a different contractor type on the same job, and the heat pumps pillar covers sizing, running costs and COP questions if that's the next thing on your list.

Tagged

Common questions

Can I register the heat pump warranty myself if the installer forgot?
Sometimes, yes. Most manufacturer portals let the homeowner lodge registration directly if you have the serial numbers, installation date and proof of purchase, but many have a strict window (commonly 30 to 90 days) after commissioning. If that window has already closed, contact the manufacturer directly and explain the situation; some will still process a late registration with commissioning evidence, but it's not guaranteed.
Does warranty registration cover labour costs or just parts?
It depends entirely on the manufacturer and the specific warranty tier. Parts cover and labour cover are frequently different lengths, and labour is often the shorter of the two. Always read the actual warranty document rather than assuming the headline number (e.g. "10-year warranty") applies equally to both.
What happens to my warranty if the installer's business closes down?
If the unit is registered correctly under your name with the manufacturer directly, the manufacturer's warranty obligation generally survives the installer's closure, since the contract is with the manufacturer, not the installer. This is exactly why registering under your own name and address, not the installer's trade account, matters so much.
Is warranty registration required by law, or just by the manufacturer?
It's a manufacturer policy, not a legal requirement. Electrical compliance certificates and refrigerant handling records are the legally mandated paperwork. Warranty registration is a commercial condition set by the manufacturer to activate extended cover, and manufacturers are within their rights to shorten warranty terms if it's not completed.
About the author
PN
Priya Nathan
Heat pumps & HVAC · Melbourne, AU

Priya covers heat pump heating, cooling and hot water systems — sizing, running costs, and what actually changes between an Australian and a US install.

Mechanical engineering background; ex-HVAC design.

More from Priya Nathan