Why a return-on-investment number for a heat pump rarely survives real life
A homeowner in Reservoir sent me her installer's quote last month with a scribbled note: "7.2 year payback — does that look right to you?" I spent twenty minutes on the spreadsheet behind it and the honest answer was no. Not because the installer was lying, but because the payback calculation assumed a fixed gas price, a single winter's heating load, and a COP that only holds up on a mild Tuesday afternoon. Change any one of those inputs and the number moves by years, not months.
This is the heat pump sizing and running-cost question I get asked more than any other, and it's rarely framed as a sizing question at all. People think payback period is a financial calculation. It's actually a thermal performance calculation wearing a financial costume, and most of the people doing it don't have the heating-season data to do it properly.
Why the payback number on your quote is already wrong
Here's the mechanic of it. An installer takes your current gas or resistive electric bill, estimates how much of it is heating, applies a COP figure from the unit's spec sheet, and divides the install cost by the annual saving. On paper that's a clean calculation. In practice almost every input is a point estimate dressed up as a constant.
Your current heating bill reflects last year's weather, not an average year. Gas and electricity tariffs move, sometimes a lot, over a system's 12-to-15-year working life. And the COP figure on the spec sheet is measured at a specific outdoor and indoor temperature combination defined by the relevant AS/NZS or AHRI test standard, not at the temperature your house actually sits at during the coldest week of July or January. I've written before about how a heat pump's COP rating diverges from real-world performance, and that gap is exactly what breaks payback maths. A unit rated at COP 4.5 might be delivering closer to 2.8 on the nights that actually matter for your bill.
Run the calculation again with a realistic seasonal COP instead of the headline number and the payback period doesn't shift by a rounding error. It can stretch by two or three years on a system sized for a cold climate.
Degree days matter more than anyone mentions at quote stage
I'd argue the single most under-used number in residential HVAC quoting is heating degree days, and almost no installer puts it in front of a customer. Degree days measure how much heating demand a location actually has over a year, which is a far better proxy for your real energy use than "the winter felt cold" or "the winter felt mild."
A house in Ballarat and a house in coastal Perth can have identical floor areas and near-identical heat pump specs quoted, yet wildly different real-world running costs because the degree-day profile is nothing alike. The same applies across the US — a Minneapolis winter and an Austin winter are not comparable inputs, and a payback calculation that doesn't adjust for climate zone is really just a guess with a decimal point.
If your installer's quote doesn't reference your climate zone's design temperature anywhere, that's worth asking about directly. It connects to a mistake I covered in the design temperature mistake that's quietly costing heat pump owners — the same missing data point that distorts sizing also distorts payback, because they're drawing from the same incomplete load calculation.
The comparison fuel is doing more work than you think
Payback period is a comparison, and comparisons are only as good as the baseline you're measuring against. Swapping from reverse-cycle split system to a better reverse-cycle split system is a very different payback shape to swapping from a ducted gas furnace or an old electric resistance system. Gas heating payback comparisons are particularly sensitive to a number homeowners rarely interrogate: the assumed future gas tariff. Gas network costs in several Australian states have been trending in a direction that makes a five-year-old payback estimate look conservative in hindsight, and in the US, states with aggressive electrification pushes like Massachusetts are seeing a similar dynamic play out through programmes such as Mass Save Heat Pump Rebates. If your quote used a gas price from two winters ago, ask for it re-run with a current rate.
On the electric-to-electric side, swapping an old resistance system for a heat pump is usually the cleanest payback case because the COP delta alone does most of the work, independent of fuel-switching assumptions. That's the comparison I trust most when someone asks me for a quick gut-check.
Standby draw and defrost cycles quietly erode the "saving"
I've gone deep on this before in why a heat pump's running cost estimate ignores standby draw, but it's worth restating here because it directly feeds the payback figure. A heat pump isn't just drawing power while actively heating. Crankcase heaters, controller boards and periodic defrost cycles all pull electricity in the background, and none of that shows up in a brochure's "cost per hour of operation" line. Defrost cycles in particular — covered in the defrost cycle myth piece — actually consume energy to run the compressor in reverse and melt ice off the outdoor coil, on top of the fan and resistive backup elements some units trigger during the cycle. On a cold, humid week with frequent defrosts, that's a real and measurable addition to your bill that a generic payback spreadsheet simply doesn't model.
Oversizing wrecks payback as badly as undersizing
We've covered why a bigger heat pump won't heat your house faster, but it's also true that an oversized unit extends your payback period, which surprises people. A heat pump sized well beyond your actual heating load short-cycles — it reaches setpoint fast, shuts off, and restarts repeatedly rather than running a longer, more efficient low-modulation cycle. Short-cycling costs efficiency on every single start, and it's the kind of inefficiency that compounds across a heating season without ever showing up as a dramatic failure. It just quietly adds months onto a payback estimate that assumed steady-state running. This is why a proper Manual J-style load calculation, which I discussed in Manual J or gross feeling, isn't academic box-ticking. It's the input that determines whether your payback number is even in the right ballpark before a single dollar of running cost gets calculated.
What I'd actually ask an installer to show me
If I were sitting across the table from an installer again — and I do this regularly, partly out of professional habit and partly because I genuinely enjoy pulling a quote apart — I'd ask for three things before trusting any payback figure. First, the degree-day or design temperature basis used for the load calculation. Second, a seasonal COP estimate rather than the peak-rated figure, ideally referencing data similar to what the US Department of Energy's ENERGY STAR programme publishes for heating seasonal performance factor. Third, a sensitivity range rather than a single number — show me the payback at a 10% higher electricity price and a colder-than-average winter, not just the best case. Any installer who can produce that without flinching has actually done the work. One who just points at a brochure COP and a single annual bill hasn't, and I'd treat that 7.2-year figure as marketing rather than engineering.
Where this leaves the homeowner doing the sums at home
None of this means heat pumps are a bad investment — the physics of moving heat rather than generating it from resistive elements or combustion is sound, full stop. It means the payback number on a glossy quote deserves the same scepticism you'd apply to a solar quote's "clear-sky payback years," a comparison I've made before because the pattern is identical: a single favourable scenario presented as the expected outcome. Ask for the degree-day basis, ask for a seasonal rather than peak COP, and build in a buffer for a colder winter and a less favourable tariff. If the payback still looks reasonable after that stress test, you've got a number worth trusting. If it only works in the best case, that's useful information too — it just isn't the one printed on the quote.
— Priya Nathan, Heat Pumps & HVAC, IceWarm
Common questions
- How long should a heat pump payback actually take?
- It depends heavily on your climate zone, the fuel you're replacing and local electricity pricing, so there's no single safe number. Electric resistance to heat pump swaps tend to pay back fastest because the COP improvement does most of the work regardless of fuel-switching assumptions.
- Does a higher COP always mean a shorter payback period?
- Not necessarily. A higher rated COP only shortens payback if it holds up at your actual design temperature. A unit with a lower rated COP but better cold-climate performance can outperform a higher-rated unit once real winter conditions are factored in.
- Should I ask my installer for a climate-specific payback estimate?
- Yes. Ask them to base the calculation on your region's heating degree days or design temperature rather than a generic average, and to show a seasonal COP estimate rather than the peak-rated figure from the spec sheet.
Priya covers heat pump heating, cooling and hot water systems — sizing, running costs, and what actually changes between an Australian and a US install.
Mechanical engineering background; ex-HVAC design.
More from Priya Nathan
- The design temperature mistake that skews every heat pump quoteMost heat pump quotes size off the wrong outdoor temperature. Here's why design temperature, not average winter temp, decides if your system actually keeps up.
- The humidity myth that throws off heat pump cooling estimatesHeat pump cooling quotes focus on temperature drop, but humidity removal is the part that actually decides comfort and running cost.
- Why "heat pumps don't work in the cold" is the wrong myth to worry aboutHeat pumps do work in the cold. The real myth is believing minimum operating temperature is the number that matters for your install.
- Vetting a refrigerant handling licence before heat pump work startsBefore a heat pump installer touches refrigerant lines, check their handling licence. Here's what the card actually proves and what it doesn't.
- Vetting a ducted heat pump installer: the warranty registration trapMost heat pump warranties need the installer to register the system within days. Miss that step and the manufacturer owes you nothing.
- The buffer tank mistake that quietly wrecks heat pump efficiencyA wrongly sized buffer tank forces a heat pump into short cycling, hammering efficiency and lifespan. Here's how to spot the mistake before install day.