Why your NatHERS or HERS rating is a design tool, not a build receipt

By Ben Sorensen · September 14, 2026 · 8 min read
Modern energy-efficient house exterior
Photo by Naksha Banwao on Unsplash

I was on site in Bellarine Street last month watching a builder argue with a certifier about a window schedule. The plans said one glazing spec, the supplier had quoted another, and the 7-star NatHERS certificate sitting in the site shed was, at that point, describing a house that didn't quite exist yet. Nobody was doing anything dodgy. It's just how the system works, and almost nobody buying or renovating a home understands it.

A NatHERS or HERS rating is a prediction generated from a set of drawings, at a moment in time, before a single stud goes up. It's not an inspection of your finished house and it's not a guarantee. Treating the number on the certificate as a fact about the building you'll eventually live in is the single most common misunderstanding I run into, and it causes real problems: disappointed owners, disputes with builders, and sometimes buildings that get re-rated years later and come back with a different score for reasons that have nothing to do with quality.

What the rating actually models

The assessor takes the architectural drawings, the specified materials, and a defined climate file, and runs them through accredited software that simulates heating and cooling loads across a full year. It outputs a star rating (or a HERS Index Score in the US context) based on that simulated performance, not on anything measured in the real world. I've written before about what a NatHERS or HERS rating actually assumes about your climate file, and that's the first layer of abstraction: the assessment is built on a regional weather file, not the microclimate of your actual street.

The second layer is the drawings themselves. If the plans specify R2.5 wall batts, double-glazed low-E windows facing north, and a particular slab edge detail, the model assumes all of that gets built exactly as drawn. It doesn't know if the installer compresses the batts to fit around services, whether the window supplier substitutes a cheaper spacer bar, or whether the slab edge insulation gets value-engineered out during a tender squeeze. The rating is only as good as the fidelity between drawing and build, and in twenty-odd years of walking sites I'd say that fidelity is good, not perfect.

Where the model and the finished building diverge

This is the part that surprises people, and it's not a criticism of the rating tools, which are genuinely well engineered pieces of software. It's a structural feature of a document-based assessment.

Air leakage is the classic example. Most residential ratings use a default air infiltration rate rather than a measured one, because measuring it means a blower door test, and blower door testing isn't mandatory for most standard residential assessments in Australia (it's more established practice in Passive House work and increasingly common in higher-performance US builds under programmes tied to ENERGY STAR's certified homes pathway). So the model assumes a reasonably sealed house. If the actual build has gaps around downlights, unsealed penetrations for the ducted heat pump, or a poorly sealed door to the garage, the real house leaks more air than the model assumed, and performance drops below the certificate's prediction. I've covered the sequencing problem this creates in Air Sealing Before Insulation: The Order of Operations That Actually Saves Energy — sealing has to happen before or alongside insulation, and it's exactly the kind of detail a paper-based rating can't verify after the fact.

Thermal bridging is another one. A rating might correctly account for insulation batts between studs but the model's treatment of the studs themselves, the window reveals, and structural steel varies depending on the software's default assumptions and how carefully the assessor entered the construction detail. On site, I regularly find timber framing at 450mm centres where the drawings specified 600mm, because the structural engineer added noggings or extra studs for wind bracing after the energy assessment was locked in. Nobody updates the rating for that. It's a small effect on its own, but it stacks with everything else.

Why the same set of plans can rate differently on different days

I've written separately about why the same house can get two different NatHERS star ratings depending on who assesses it, and the divergence between model and building is a related but distinct issue. Two assessors working from identical, complete drawings should land close together. But drawings are rarely complete or final at the point of assessment — variations get issued after the rating, suppliers substitute products, and construction tolerances do the rest.

This is why a "7-star" home doesn't automatically mean a comfortable one. My colleague's piece on whether a 7-star NatHERS rating can still leave you freezing in July gets into the occupant-behaviour side of that gap. The construction-fidelity side is just as real: a house rated at 7 stars on paper, built with compressed insulation and unsealed penetrations, can perform meaningfully worse than the certificate suggests, without anyone having done anything you'd call fraudulent.

What an as-built assessor is actually checking for

Some jurisdictions and some builders commission an as-built or as-constructed reassessment, where an assessor physically inspects the finished house before issuing final certification. This is where the theoretical model gets tested against reality, and it's covered in more detail in What a NatHERS or HERS Assessor Actually Checks On-Site.

In practice this means checking installed R-values against specified R-values (batts that have been squashed into a smaller cavity lose real-world performance even if the label still says R2.5), verifying glazing has been installed with the specified U-value and SHGC rather than a cheaper substitute, confirming insulation continuity around eaves and at the wall-to-roof junction where gaps are common, and checking that the slab edge or subfloor insulation detail matches the drawing. None of this is optional if you want the certificate to mean something. I'd argue the industry under-invests in as-built verification generally — it's treated as a nice-to-have rather than standard practice, and that's a structural weakness in how the ratings get used downstream by both buyers and councils issuing occupancy certificates.

What this means if you're buying, building or renovating

If you're relying on a NatHERS or HERS rating as part of a purchase decision or a building contract, ask three things. First, is this rating based on final, as-issued-for-construction drawings, or an earlier design iteration? Ratings done early in the design process, before council approval, get revised constantly and the certificate you're shown might not reflect what's actually being built. Second, has anyone verified installed materials against the specified materials, particularly glazing and insulation? Third, if air sealing wasn't measured, ask what infiltration rate was assumed and whether the build methodology (particularly around service penetrations for a heat pump or ducted system) is likely to hit that target.

For renovators specifically, this matters even more, because a whole-of-house rating gets recalculated whenever you touch the building envelope, and a rating done pre-renovation tells you nothing about the post-renovation performance until it's reassessed. If you're planning a glazing upgrade as part of the works, it's worth reading Double vs Triple Glazing: When the Extra Pane Is Actually Worth It before locking in a spec, because the marginal gain from triple glazing depends heavily on climate and orientation, and a generic assumption baked into a rating tool won't capture your specific site conditions.

The gap is a feature to manage, not a flaw to fear

None of this means the ratings are useless, and I want to be clear about that. NatHERS in Australia and the HERS Index in the US (administered through RESNET-accredited raters) are both well-validated tools built on established building science, and they're the best comparative benchmark most buyers will ever get. The US Department of Energy's building energy codes programme and Australia's Nationwide House Energy Rating Scheme both rely on the same underlying principle: model the envelope, predict the load, compare it against a benchmark. That's genuinely useful for comparing a 4-star project home against a 7-star one before you sign a contract.

The mistake is expecting the certificate to be a receipt for a finished, verified building rather than what it actually is: a prediction based on drawings, honest at the moment it was issued, and only as accurate as the gap between what was specified and what gets built. Ask for as-built verification if you can get it. If you can't, at minimum ask your builder to confirm, in writing, that installed materials match the rated specification, particularly insulation and glazing. That single conversation would have saved the argument I watched play out in that site shed on Bellarine Street.

A quick word on where this fits with the rest of the build

None of the envelope work happens in isolation from the mechanical systems that eventually have to heat and cool the place. A tighter, better-rated envelope changes the load calculation your heat pump installer should be running, and it's worth reading the design temperature mistake that's quietly costing heat pump owners alongside your rating documents if you're specifying heating and cooling at the same time as the envelope. Getting the envelope right first is still the correct order of operations. It's just not the whole story, and the rating certificate was never meant to be either.

Tagged

Common questions

Does a NatHERS or HERS rating get reissued once the house is built?
Not automatically. A final rating reflects the drawings at assessment time. Some projects commission an as-built reassessment where an assessor physically checks installed materials against the specification, but this isn't mandatory everywhere, so ask your builder or certifier whether it's included.
Can a builder legally substitute materials after the rating is done?
Substitutions happen regularly during construction, but any change to insulation, glazing or sealing specified in the rated design should trigger a review, because it can change the actual energy performance even if the certificate isn't updated to reflect it.
Why would my house perform worse than its star rating suggests?
The most common causes are compressed or gapped insulation, unsealed penetrations around services and downlights, glazing substituted for a cheaper product, and thermal bridging at framing or window reveals that the model didn't fully capture.
Is a HERS Index Score in the US assessed the same way as NatHERS?
Both use accredited software modelling against a climate file and specified construction details, but they use different scoring scales and different verification requirements. See our comparison of NatHERS vs HERS for the specifics.
About the author
BS
Ben Sorensen
Green building · Perth, AU

Ben covers insulation, glazing and home energy ratings — the building-envelope work that decides how hard every other system has to work.

Building-certification background (NatHERS-adjacent).

More from Ben Sorensen