Why your NatHERS or HERS rating never checks your orientation on site
I walked a slab on Carrington Road in Bentleigh East two months back, tape measure in hand, because the owner thought something felt off about the living room facing. It was. The plans had the north-facing glazing on the eastern elevation, someone on site had rotated the build footprint fifteen degrees during a boundary resurvey, and nobody flagged it against the energy assessment that had already been lodged. The NatHERS certificate said 7.2 stars. The house that got built was not the house that got rated.
This is the bit of a home energy rating that surprises almost every client I talk to: orientation is entered once, by the assessor, off a set of plans, and it is never independently verified against the finished building. Not by the assessor, not by the certifier in most cases, not by anyone holding a compass on handover day. The rating is a prediction built on an assumption, and the assumption is "the house will face the way the plans say it faces."
What the assessor actually enters
When an accredited assessor runs a NatHERS simulation (or a HERS rater runs a RESNET simulation in the US), orientation is one of the first inputs into the software, alongside floor area, construction type, glazing specification and the relevant climate file. They're working off architectural drawings, usually a site plan with a north point. They don't attend the pour. They don't attend frame stage. In a project home run on volume-builder documentation, the assessor might never set foot on the block at all; the whole thing is desktop-modelled from a standard plan rotated to match the lot.
That's not laziness. It's how the system is designed. The rating tool, whether it's NatHERS in Australia or the RESNET HERS Index used across most of the US, exists to model a building's thermal performance against a standard climate file and a standard occupancy pattern, not to inspect the physical building. My colleague covers the occupancy assumptions in more detail in what your NatHERS or HERS rating assumes about how you'll live in the house — orientation sits in the same category of "modelled input nobody revisits."
Why a few degrees matters more than people think
Orientation error doesn't need to be dramatic to matter. A living room glazing wall that's meant to face true north but ends up facing north-northwest by twenty degrees will pick up measurably more afternoon summer heat gain and lose some of the reliable winter sun angle that made the design work in the first place. Swing it forty-five degrees, which happens more often than you'd expect on tight infill blocks where the final pad gets set by a surveyor working around easements, and the house's actual thermal behaviour can diverge meaningfully from the number on the certificate. The star rating itself usually survives small rotations without changing — NatHERS modelling has some tolerance built in and six-star performance at 350 degrees true north and six-star performance at 340 degrees aren't wildly different outcomes in most climate zones. But "the star rating survives" and "the house feels the same" are different claims, and I'd argue the gap between them is exactly where owners get caught out. We've written before about why a NatHERS or HERS rating can't tell you two houses feel different, and orientation drift is one of the clearest mechanical reasons that happens.
Where the drift actually happens on real builds
In my experience there are three predictable points where a building's true orientation departs from its plan orientation, and none of them get fed back into the energy rating.
The first is at pegging and boundary setout, where a surveyor working to a slightly different benchmark, or a builder working around an unexpected services easement, rotates the footprint to fit the block. The second is during a design amendment after the rating's already been lodged — a window gets swapped from the north wall to the east wall because the client wants a different kitchen layout, and the amendment never goes back through the assessor because everyone assumes "it's a similar-sized window, it'll be fine." The third, and the one I see most on sloping or irregular blocks, is where the architect's north point on the original survey was itself slightly wrong, so everything downstream inherits the error.
None of these show up on a building inspection checklist. A building surveyor checking for compliance under the National Construction Code, or a local building code official in the US doing a frame inspection, is checking structural and life-safety items. Orientation relative to an energy model isn't on that list, and there's no standard mechanism that routes a late design change back through the energy assessor for re-verification before occupancy.
What actually gets checked on site (and what doesn't)
If you want the fuller picture of site verification, I'd point you to the companion piece on what your NatHERS or HERS assessor actually measures on site, because orientation isn't the only thing that falls through this gap — insulation installation quality and window install quality have the same problem, covered in does a NatHERS or HERS rating ever check your insulation installation? and why your NatHERS or HERS rating never checks your windows' install. Orientation sits alongside those as a design-stage input that's treated as fixed once it's entered, with no feedback loop back from the finished building.
For what it's worth, I think this is a structural weakness in the rating scheme rather than a failure of any individual assessor. Assessors are doing exactly what they're asked to do — model the design as documented. The problem is that nobody in the chain of certifiers, builders and surveyors owns the job of confirming the as-built orientation matches the as-designed orientation before the certificate gets filed away as evidence of compliance.
What you can actually do about it
If you're building new, the cheapest insurance is a five-minute check at frame stage: stand in the main living space with a compass (your phone's compass app is fine for this, it doesn't need survey-grade accuracy) and check the main glazing wall against the orientation stated on your energy certificate. If it's out by more than a few degrees, raise it with your builder before linings go on, while a window swap or shading adjustment is still cheap.
If you're buying an established house with a NatHERS or HERS rating attached, don't take the certificate's star number as confirmation the house performs the way the model says. Walk the block at midday in summer and again if you can manage it in winter, and look at where the sun actually falls relative to the main living areas. The Australian Government's NatHERS website has a reasonably clear explainer on how climate zones and orientation factor into the rating, and the US Department of Energy's building science guidance covers the same fundamentals for HERS-rated homes — both are worth ten minutes before you rely on a certificate as a performance guarantee rather than a design-stage estimate.
And if you're renovating or extending an existing rated home, remember that any change to glazing position or orientation on that elevation should, in principle, trigger a re-rating. In practice it often doesn't, because nobody's chasing it. That's on you to flag, not the paperwork.
None of this means the rating scheme is broken — it does what it's designed to do, which is model a design, not audit a building. But treating a star rating as proof of built performance, rather than evidence of a plan that was once compliant, is where I see owners get the most frustrated years later when the house doesn't behave the way the certificate implied it would.
A quick word on climate files
It's also worth remembering orientation is only useful relative to the climate file the assessor selected for your location, which my colleague has covered in what a NatHERS or HERS rating actually assumes about your climate file. A perfectly oriented house modelled against the wrong climate zone data is still going to surprise you on energy bills, which is a separate but related reason the certificate doesn't map cleanly onto why your NatHERS or HERS rating doesn't care about your energy bill. Orientation, climate file and occupancy assumptions all stack on top of each other, and a small error in any one of them compounds the gap between the number on the certificate and the house you actually live in.
If you're mid-build right now, go check your frame against your certificate this week. It's a five-minute job and it's a lot cheaper to fix before the plaster goes up than after.
Common questions
- Can a NatHERS or HERS rating be voided if the house isn't built on the plan's orientation?
- Technically yes, since the rating is tied to the specific design documentation lodged, but in practice there's no standard mechanism that automatically flags an orientation change back to the assessor. It relies on the builder, certifier or owner raising it.
- How far off can orientation be before it actually changes the star rating?
- It depends on climate zone, glazing area and shading, but small rotations of a few degrees rarely shift the headline star number much. Bigger rotations, especially on heavily glazed elevations, can meaningfully change summer heat gain and winter solar access even if the certificate's star rating looks unchanged.
- Is this more of a problem in Australia with NatHERS or in the US with HERS ratings?
- Both systems model orientation as a fixed design input and neither has a routine as-built verification step, so the issue exists on both sides. RESNET's HERS process and NatHERS both rely on documentation review rather than compass checks at handover.
- Should I ask my builder to re-check orientation during the build?
- It's a reasonable request, particularly at frame stage before linings go on. A quick compass check against the orientation stated on the energy certificate costs nothing and can catch a costly mismatch while it's still cheap to adjust.
Ben covers insulation, glazing and home energy ratings — the building-envelope work that decides how hard every other system has to work.
Building-certification background (NatHERS-adjacent).
More from Ben Sorensen
- Why a NatHERS or HERS rating can change without touching the buildA NatHERS or HERS rating can shift star bands when software updates, climate files get revised, or rules change — even if your house hasn't.
- Why your NatHERS or HERS rating ignores your floor coveringsCarpet, tile and polished concrete all score the same in a NatHERS or HERS model, even though they feel wildly different underfoot and change how your heating actually performs.
- Vetting an insulation installer: the R-value receipt nobody asks forInsulation installers rarely need a specific trade licence, which is exactly why the paperwork trail matters more than the handshake.
- Why your NatHERS or HERS rating never touches your thermal bridgesA NatHERS or HERS rating models your walls as flat layers, which means steel studs, balcony slabs and window reveals rarely get the credit (or blame) they deserve.
- Vetting a window glazier for new-build glazing: what to checkBefore a glazier touches your new-build windows, check the licence, the AS 2047 compliance paperwork and the install method. Here's what actually matters.
- Why a NatHERS or HERS rating can't tell you two houses feel differentA NatHERS or HERS rating scores energy load, not comfort. Two homes with identical stars can feel completely different to live in, and here's why.