Why a NatHERS or HERS rating treats every room as equal (it isn't)

By Ben Sorensen · October 14, 2026 · 7 min read
Modern energy-efficient home exterior
Photo by Naksha Banwao on Unsplash

I was at a new build on Grevillea Street in Diamond Creek a few months back, standing in a north-facing living room that was pleasantly warm in July sun, then walking twenty steps down the hall into a south-east bedroom that felt like a different house entirely. The project had a 7.2-star NatHERS rating. The owner was confused about how a 7-star house could have a cold bedroom. The answer is that the star rating never promised otherwise — it's a whole-house average, and averages hide exactly this kind of thing.

This is the bit of a home energy rating that catches people out most, more than orientation quirks or climate file assumptions. The number on the certificate is a single figure representing the thermal energy load of the entire conditioned floor area, modelled room by room internally but reported externally as one blended result. A brilliant living zone can carry a mediocre bedroom wing to a respectable star rating. Nobody lied to you. Nobody mentioned it either.

How the average actually gets built

NatHERS software (and the US HERS Index process run through RESNET-accredited raters) does model each thermal zone of the house separately in the background. Living areas, bedrooms, a home office, maybe a sunroom — each gets its own simulated heating and cooling load across a full reference year of climate data. That's genuinely granular work. The tool knows your north bedroom needs less heating than your south one.

But the output that goes on the certificate isn't a room-by-room scorecard. It's the total predicted energy load for heating and cooling, divided by floor area, converted to a star rating against a benchmark. Every zone gets folded into one figure the moment the report is generated. The engine saw the detail; the certificate doesn't report it. That's consistent with how both NatHERS and the HERS Index are built: they're designed to compare whole buildings against each other, not to diagnose which room in your particular house will be the uncomfortable one.

Why a strong zone can carry a weak one

Here's the mechanical reason it works this way. If your living areas are large, well-oriented, and well-glazed with decent solar access, their modelled load is low — sometimes very low, because a sunny north room in winter can run close to zero net heating load in the simulation. That low number drags the house average down a long way, because the average is weighted by floor area and by the relative size of each zone's load, not by room count.

A 90-square-metre living and kitchen zone that performs brilliantly can offset a 12-square-metre bedroom that performs badly, with plenty of margin left over. The maths rewards getting your biggest, most-used rooms right. It does not require every room to clear any particular bar on its own. I'd argue that's actually the correct design priority for a rating tool to encourage — living areas are occupied more hours per day — but it does mean the certificate tells you almost nothing about your worst room.

We've covered how a 7-star rating and a freezing July can coexist before, and this averaging effect is the mechanism behind a good chunk of those complaints. It's not usually that the rating was wrong. It's that the rating was never answering the question the occupant is now asking.

The zones that typically drag

From the handful of ratings and assessor conversations I've sat in on, a pattern shows up often enough to be worth naming. South-facing bedrooms in a south-hemisphere climate (or north-facing in the US) tend to carry the weakest numbers, especially where they're small, have a single modest window, and share a wall with an unheated garage or an external corner with poor solar access. Ensuites and powder rooms get modelled too, and their loads can be surprisingly high relative to floor area because there's so little glazing to pick up any free solar gain and the room is small enough that one deficiency dominates it.

A home office tucked into a southern corner because it was the leftover space in the plan is another repeat offender. Nobody designs the office wing with the same care as the living room, and the rating doesn't force anyone to, because the office's small floor area means its weak performance barely moves the blended average.

None of this shows up as a flag on the certificate. There's no asterisk next to "bedroom 3." You'd only find it by asking your assessor, before design is locked in, to show you the zone-by-zone breakdown that the software already calculated and the report doesn't print.

What to actually ask for before you lock in plans

If you're working with an assessor during design (the point where this information is genuinely useful, rather than after the slab is poured), ask them directly for the per-zone loads, not just the headline star rating. Most NatHERS software — AccuRate, FirstRate5, BERS Pro — can export this. It's a standard part of the assessor's working file; it's just not part of the standard client deliverable, so you have to ask.

Look specifically at which zones carry heating loads well above the house average and which carry the house. If your main bedroom is one of the weak zones, that's worth a design conversation now — a bit more glazing, a different window orientation, extra insulation at that corner, before it's locked into brick and frame. This is the stage where a cheap fix (moving a window 600mm, adding external shading, reorienting a room by swapping it with the study) costs nothing structurally but changes which rooms absorb the discomfort.

It's also worth reading this alongside what your assessor actually measures on site — the on-site visit confirms as-built details, but the zone modelling happens at design stage from the drawings, which is exactly when you still have the freedom to change something.

Why the certificate doesn't surface this (and probably shouldn't, fully)

I don't think this is a flaw to fix by cramming a room-by-room table onto every certificate. NatHERS and the HERS Index exist as comparative design tools and, in Australia's case, as a regulatory compliance mechanism under the National Construction Code's energy efficiency provisions. Their job is to let a certifier confirm a building meets a minimum standard and let a buyer compare one home's shell performance against another's, using one number that's simple enough to put in a contract.

Turning that into a 12-room scorecard on every disclosure document would make the certificate harder to read for the 95% of its use cases, in exchange for solving a problem that's better solved at the design review meeting anyway. The fix isn't a new box on the form. It's asking the right question of your assessor while the floor plan is still a floor plan and not a wall.

This sits next to a related blind spot we've written about — the small junction details a rating doesn't catch — in that both are things the modelling software technically "knows" at some level but the certificate simply isn't built to communicate. The rating was never meant to be a room-by-room comfort guarantee. Treating it as one is where the disappointment comes from, not any failure in the tool itself.

What this means if you're buying, not building

For a renovation or an existing-home purchase, you don't get the zone breakdown at all unless you commission a fresh assessment, because existing-home NatHERS ratings (where done, since they're not universal for resale in Australia the way they are for new builds) are typically a single retrospective number with no design-stage working file attached. If a listing quotes a star rating, that number tells you almost nothing about which bedroom will need a space heater in winter.

In that situation a blower door and thermal imaging audit is a more useful spend than chasing the star number, because it'll actually show you where the cold corners are rather than averaging them away. The Clean Energy Council's consumer guidance and the US Department of Energy's home energy assessment resources both point the same direction: a rating tells you about the building type, an audit tells you about the specific building you're standing in.

The practical takeaway

A 7-star or high-HERS-Index house is still a good outcome on balance — the methodology is sound and the benchmark is meaningful at the building level. But if comfort in a specific bedroom matters to you more than the certificate number, don't stop at the star rating. Ask for the zone breakdown, walk the plans with that in mind, and treat the single number as the headline of a report you haven't fully read yet.

— Ben Sorensen, Green Building, IceWarm

Tagged

Common questions

Does NatHERS model every room separately even though only one star rating is shown?
Yes. The software divides the house into thermal zones and calculates a heating and cooling load for each one using a full year of climate data, then combines those loads into a single floor-area-weighted average for the certificate. The detail exists in the assessor's working file; it just isn't part of the standard report.
Can I ask my assessor for the room-by-room breakdown?
Yes, and you should if comfort in specific rooms matters to you. Ask during the design stage, before working drawings are finalised, since that's when changes to glazing, orientation or insulation in a weak zone are cheap to make.
Why does a well-performing living room let a poor bedroom through?
The whole-house figure is weighted by zone size and load, not room count. A large, well-oriented living area with a very low modelled load can offset a small, poorly oriented bedroom with a much higher load, without the average reflecting how uncomfortable that bedroom will actually feel.
Does the US HERS Index work the same way?
Broadly yes. RESNET-accredited raters use zone-based energy modelling to calculate the HERS Index, and the published Index number is a whole-house figure. The underlying zone data exists in the rating software but isn't typically handed to the homeowner unless requested.
About the author
BS
Ben Sorensen
Green building · Perth, AU

Ben covers insulation, glazing and home energy ratings — the building-envelope work that decides how hard every other system has to work.

Building-certification background (NatHERS-adjacent).

More from Ben Sorensen