Vetting a blower door and thermal imaging auditor before you pay for a report
Last month I sat in on a home energy audit in a weatherboard place off Rosslyn Street, the kind of 1960s build with a wall furnace and a subfloor you could lose a cat in. The auditor pulled out a thermal camera, took four photos through the living room, and handed the owner a twelve-page report with a graph on the cover. No blower door. No duct blaster. Nothing that actually measured air leakage, just infrared photos of cold patches anyone could see by putting a hand near the skirting board. The owner paid close to what a proper diagnostic audit costs and got a glorified photo album.
That's the trade I want to talk about here, because it doesn't get the scrutiny that heat pump installers or solar electricians get. Nobody asks an energy auditor for their ticket. Most homeowners don't even know there's a ticket to ask for.
What licensing actually exists for this trade
Unlike electrical or refrigerant work, home energy auditing isn't uniformly licensed the way, say, refrigerant handling is under an F-gas style certification. It sits in a messier space of voluntary and semi-mandatory credentials, and that's exactly why red flags matter more here than in almost any other trade I cover.
In the US, the credential that actually means something is a Building Performance Institute (BPI) certification, specifically BPI Building Analyst or BPI Multifamily Building Analyst for whole-house work. BPI-certified auditors have sat a proctored exam covering combustion safety, air sealing hierarchy, and diagnostic testing procedure, and they're required to carry current standing, not a certificate from 2016 gathering dust in a filing cabinet. The ENERGY STAR Home Energy Score programme, run through the US Department of Energy, also has its own assessor qualification, and RESNET certifies HERS raters separately again — worth knowing these are three different credentialing bodies, not one universal licence, so "I'm certified" is a question that needs a follow-up: certified by whom, for what.
In Australia the picture is different again. There's no single "energy auditor" licence. What you're actually checking for is whether the person doing your blower door test or thermal scan holds a NatHERS accreditation if they're producing a star rating, or is working under a building certifier's supervision if the audit feeds into compliance documentation. The Clean Energy Council's accredited installer scheme covers solar and battery trades, not building envelope diagnostics, so don't expect it to apply here. If your audit is tied to an official NatHERS assessment, the assessor should be listed on the national accreditation register, full stop, and you can check that yourself in about ninety seconds.
The blower door test itself is the tell
If someone shows up to do a "home energy audit" and doesn't bring a blower door, ask why. A blower door — the calibrated fan and door frame rig that depressurises the house to measure air changes per hour — is the single measurement that turns an audit from guesswork into data. Thermal imaging is a brilliant diagnostic layered on top of a blower door test because pressurising the house makes leaks show up clearly on camera as cold streaks. Thermal imaging on its own, with the house at normal pressure, mostly shows you where insulation is missing, which is useful but is a different job entirely and a much cheaper one to perform.
I've written before about how air sealing and blower door contractors get vetted for the actual sealing work, and the checks overlap here: ask what number they measured the house at (CFM50 in the US, or air changes per hour under the AS/NZS airtightness testing method here), and ask to see the reading, not just hear it quoted. A real practitioner will show you the manometer screen or the data logger output. Someone spruiking a report will give you a number from memory that conveniently matches whatever conclusion they were going to write anyway.
Combustion safety testing is the other tell. Any BPI-standard audit in a house with gas appliances includes a worst-case depressurisation test, checking that running exhaust fans and clothes dryers simultaneously doesn't backdraft a gas water heater or furnace and pull carbon monoxide into the living space. If your auditor skips this in a house with gas appliances, that's not a shortcut, it's a safety gap, and I'd push back on the invoice.
Reading the report for substance, not graphics
A report with slick infographics and no raw numbers is a red flag I'd weight heavily. The actual deliverable should include the blower door reading in CFM50 or ACH50, a duct leakage figure if ductwork was tested, room-by-room thermal notes tied to specific locations (not vague "insulation appears inadequate throughout"), and prioritised recommendations ranked by cost-effectiveness, not just a list of everything wrong with the house.
Here's my mildly unpopular view on this: a report that recommends new windows before it recommends air sealing gaps around the rim joist and attic hatch is usually written by someone who either doesn't understand the standard retrofit priority order, or who's about to upsell you glazing. Air sealing is nearly always the cheapest kWh saved in an existing house, ahead of insulation top-ups, and miles ahead of anything involving new windows — I go through why in air sealing before insulation. If the report's priority list doesn't roughly follow that order, ask them to justify it.
Questions worth asking before you book
I'd ask three things on the phone before an auditor sets foot in the house. First, which certification do you hold and can you give me the certificate number or registry link. A legitimate BPI Building Analyst or a NatHERS-accredited assessor will rattle this off without hesitation, because they've had to prove it before. Second, does the audit include a blower door test as standard, or is that an add-on. If it's an add-on on a house you suspect has draught problems, you're not getting the full picture for the base price. Third, ask what equipment they're bringing — a calibrated blower door fan, a thermal camera with a stated resolution, and ideally a combustion analyser if there's gas in the house.
I'd also ask who insures the work. Auditors carry professional indemnity and public liability the same as any trade working inside occupied homes, and a legitimate operator won't blink at the question. One who gets cagey about insurance is one I'd walk away from, same as I'd walk away from an insulation installer who couldn't produce a current licence, which I covered in vetting an insulation installer's licence.
Where the report should actually lead
An audit that's worth paying for tells you what to fix first, in what order, and roughly what each fix is worth in comfort and running cost. It shouldn't just restate what a NatHERS or HERS rating gives you at the design stage, because as I've argued before, a star rating won't tell you what to fix first in an existing house — it's a compliance number, not a retrofit roadmap. A proper diagnostic audit fills that gap. If your report reads like a rebrand of a NatHERS certificate with some thermal photos stapled on, you've been sold the wrong product.
The follow-through matters too. Ask whether the auditor does a post-work retest. If you pay for air sealing based on their findings, a competent operator will offer to re-run the blower door afterward to confirm the ACH50 number actually dropped. Skipping that step is common, and it's also how a homeowner ends up with no way of knowing whether the money they spent did anything measurable.
What I'd tell a neighbour
Honestly, if I were vetting someone for my own place, I'd want to see the blower door reading before I even looked at the thermal photos. The photos are the sizzle. The number is the steak. A good auditor will happily walk you through both, explain the standard they tested against, and won't get defensive when you ask for the certification number. That's really the whole test. Anyone cagey about proving their credentials on a job that's meant to be about transparency and measurement has already told you what you need to know.
Common questions
- Is a thermal imaging scan on its own worth paying for?
- On its own, without a blower door test pressurising the house, thermal imaging mostly shows missing insulation rather than air leakage paths. It's a useful add-on to a proper diagnostic audit but a weaker standalone service, and it should be priced accordingly.
- What's the difference between BPI certification and a NatHERS accreditation?
- BPI Building Analyst is a US credential for whole-house diagnostic auditing, including blower door and combustion safety testing. NatHERS accreditation in Australia is specifically for producing an official star rating against the national scheme. They cover different scopes and aren't interchangeable.
- Should a blower door test happen in every energy audit?
- If air leakage or draughts are part of what you're paying to diagnose, yes. Without it you're relying on visual inspection and thermal photos alone, which can't quantify how leaky the house actually is.
- How do I check if a NatHERS assessor's accreditation is current?
- Ask for their accreditation number and check it against the national NatHERS assessor register, which is publicly searchable. A legitimate assessor will give you the number without hesitation.
Ben covers insulation, glazing and home energy ratings — the building-envelope work that decides how hard every other system has to work.
Building-certification background (NatHERS-adjacent).
More from Ben Sorensen
- Why a NatHERS or HERS rating can change without touching the buildA NatHERS or HERS rating can shift star bands when software updates, climate files get revised, or rules change — even if your house hasn't.
- Why your NatHERS or HERS rating ignores your floor coveringsCarpet, tile and polished concrete all score the same in a NatHERS or HERS model, even though they feel wildly different underfoot and change how your heating actually performs.
- Vetting an insulation installer: the R-value receipt nobody asks forInsulation installers rarely need a specific trade licence, which is exactly why the paperwork trail matters more than the handshake.
- Why your NatHERS or HERS rating never touches your thermal bridgesA NatHERS or HERS rating models your walls as flat layers, which means steel studs, balcony slabs and window reveals rarely get the credit (or blame) they deserve.
- Why your NatHERS or HERS rating never checks your orientation on siteYour NatHERS or HERS star rating locks in orientation at design stage, but nobody re-checks it once the slab is poured the wrong way round.
- Vetting a window glazier for new-build glazing: what to checkBefore a glazier touches your new-build windows, check the licence, the AS 2047 compliance paperwork and the install method. Here's what actually matters.